How does Skylight determine the identity of a vessel detection?
When viewing vessel detections in Skylight, you’ll note that some are labeled “AIS Correlated Vessel Detection” while others are “Dark Vessel Detection”.
Using an algorithm, Skylight matches AIS points with vessel detections to identify and display vessel metadata information for any vessel that can be matched or ‘correlated’ with AIS. If there are no AIS points near the detection, it’s considered a Dark Vessel Detection and no vessel metadata is displayed .
In the below illustration, 1 and 3 are vessel detections and 2 is an AIS point. The Skylight correlation algorithm has determined the AIS point 2 was likely transmitted by the vessel in detection 1. Detection 1 is labeled AIS Correlated Detection and the vessel data available from AIS is displayed.
There is no AIS ping near detection 3 so the Skylight algorithm labels that detection “Dark Vessel Detection” and no additional vessel data is displayed.
The Skylight correlation process searches over a circle centered on each vessel detection for overlaps. All intersecting segments from every vessel’s search radius will be used to compute all predicted vessel positions. AIS pings from vessels further than 1500 meters from the location of a vessel detection are disregarded as possible matches.
Skylight is contractually prohibited from sharing raw AIS points.
Why would a detection be labeled ‘Dark’ and then later be correlated?
As a near real-time system, Skylight displays the most up-to-date information available at the time. Sometimes additional updated AIS data is received or internal Skylight processes are completed after vessels are detected in our non-AIS sources and Skylight may learn that a detection previously marked as ‘dark’ can be correlated. Skylight will display the detection as soon as it’s available and update the correlation status as additional information is available.
There may be instances in Skylight when a vessel event is displayed and a nearby Night Lights detection displays as dark. Skylight reruns the correlation service every XX hours to attempt to identify any dark detections that can now be identified with updated AIS data.
It is very rare for the opposite scenario to occur: a previously correlated detection to be updated to dark.